Search through our Members list to work with the key Welsh Suppliers for the Nuclear Industry.

Join the Wales Nuclear Forum to be part of a key strategic group to promote the services you provide and have a key voice within the Nuclear industry.



Animated Technologies creates shared experiences with VR, AR and animation. Visually communicating technical products. Award-winning and with over 10 years experience within the 3D and creative industries, Animated Technologies delivers high quality virtual reality, augmented reality and animation services. Creative Solutions for innovative companies. Established in 2017 | Located in M-SParc on Anglesey Animated technologies take technical concepts and translate them into engaging experiences and captivating visuals. Through augmented reality, virtual reality and animation, Animated Technologies embrace creativity to produce innovative results that help their clients stand out.

The Nuclear Futures Institute at Bangor University was established in late 2017 to accelerate advances in nuclear research, training and technologies for the North Wales region. Nuclear energy has played a key role in the area for many decades and the end of the Magnox era has opened up greatnew opportunities with two exceptional nuclear licensed sites: Wylfa and Trawsfynydd. Funded through WEFO, the NFU has built extraordinary facilities that are being used by leading industry stakeholders to aid nuclear technology development. There is a growing research team consisting of masters students, industry sponsored PhD students, post-doctoral researchers with early career and seasoned academics led by Prof. Bill Lee.

Barry Training Services was founded in 1990, initially providing lift truck training to local companies, it rapidly expanded to other plant training as well as health and safety training courses accredited by the appropriate awarding bodies such as RTITB, ECITB, CITB, NPORS, SQA, UKATA, IOSH, IPAF, PASMA, JAUPT & Qualifications Network, new courses are continually being added and where possible we are happy to tailor a course to suit a Clients own specific needs. With 2 training centres in South Wales, head office on the outskirts of Barry as well as a centre in Port Talbot both with ample classrooms, large indoor practical training area and ample parking,  we also have an office at Bridgwater, in addition to our training centres we also travel throughout the UK as well as Europe to deliver courses.  

Bechtel helps our customers deliver projects of purpose that create a lasting positive legacy. These are projects that create jobs and grow economies; improve the resiliency of the world’s infrastructure; connect communities to resources and opportunity; get us closer to net zero; tackle critical environmental challenges; protect people and the planet; and accelerate progress to make the world a cleaner, greener, safer place.

While expertise enables delivery, partnerships ensure long-term success, which is why we align everything we do to our customers’ goals.

Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents.

At Beehive we’re specialists in transforming safety culture and safety behaviours. Since the introduction of ISO 45001 and with organisational culture, worker engagement and dispersed leadership at its core, there has never been a more important time to develop the mindset, skills and tools needed for safety. We can support organisations by providing:

  • Cultural audit and strategy,
  • Safety education – delivery and design of development, re-enactment, Human Performance and leadership
  • Benchmarking, SMS audit and research
  • Well-being and emotional resilience training

Contact Mark Sykes or Sara Lodge on info@beecld.co.uk  07780 606 307

With over 30 years’ experience working on major projects in Wales and England, Cadnant have secured planning approval and provided input on a range of projects within the Energy sector, including nuclear power; hydrogen fuel facilities; solar and wind energy.

Cambrian Fusion Technology Ltd, established in 2010, provides professional welding, materials, inspection/NDT, RWC, ISO 3834 and EN 1090 compliance services to companies operating in highly regulated industries, via a select network of Chartered Welding/Materials and NDT Engineers.

Established in 1973, C&P Engineering Services Ltd is a specialist Electrical and Instrumentation Services company that has a reputation of minimising risk through safe, professional and versatile high quality Electrical & Instrumentation Services.


We have built up a reputation in a wide range of industries, namely the Chemical, Petrochemical, Oil & Gas, Steel, Power Generation, Pharmaceutical, Nuclear & Renewable Energy industries. The vast majority of our Electrical and Instrumentation Services are carried out on COMAH sites and typically hazardous areas workplaces/environments that may contain or have activities that produce, explosive or potentially explosive atmospheres which can be caused by flammable gases, mists or vapours or by combustible dusts.


For over fifty years we have continually developed and improved our knowledge base and operational systems to the point where we are now recognised as one of the UK’s leading international Electrical and Instrumentation Services contractors, with projects carried out safely, on time and on budget from Western Europe to the Far East.

Carpenter & Paterson Ltd are specialists in the design and manufacture of Pipe Support Equipment and Fabricated Steelwork. Our comprehensive service includes the supply of a wide range of standard pipe support components. We have the in-house facilities to design and supply special pipe support fabrications and equipment in a wide range of materials and finishes to suit our customer’s specific requirements.

The Company was established in 1956 in the UK and has since developed into one of Europe’s largest manufacturers of Pipe Supports exporting around the world.

Please visit our website www.cp-ltd.co.uk where you can find all of the latest company news feeds, download section & contact details.

Our independently run services provide a high standard of professionalism and care, all of which hold their own United Kingdom Accreditation Service (UKAS) accreditation. Delivered by an exceptionally skilled and very approachable team. We provide:

  • Welding Procedure & Qualification Testing – for welds, welding procedures and welder certification
  • Non-Destructive Testing (NDT)– for weldments and metallic materials, on-site and in-house
  • Mechanical Testing – for weldments and metallic materials

With our three independently run services, we at Code A Weld can support, inspect and test all of your welding, mechanics and metallic materials – ensuring that all of your operations are functioning as they should be.

Cwmni Egino is a Welsh Government owned company set up in 2021 to create sustainable jobs and promote economic and social regeneration by developing the former nuclear power station site at Trawsfynydd

  1. ETC Limited provides independent business winning support to the UK Civil Nuclear and Defence Nuclear communities. Our services include: – Business Winning strategic support services – Independent PQQ/SQ and ITT management and support functions – Independent Bid Response Review (Pink and Red Team) services.

We are a business management consultancy specialising in ISO Consultancy, Principal Designer Services and CDM Services. We can help businesses improve their prospects during the tendering work for working on Projects. We are also currently developing management systems for ISO 19443 – Quality Management Systems Specific for Nuclear. We also an online training service on our website: www.eonlinetraining.co.uk. More information about the business can be found on www.eryriconsulting.co.uk

Deplant UK is an alliance of specialist organisations working together to provide dynamic solutions to decommissioning in the most highly regulated sites including nuclear, oil and gas and chemical installations.

Strategically, this means that multidisciplinary, decommissioning, decontamination and complex demolition projects can be safely and efficiently delivered from a single source. Each member company within the Deplant UK Alliance has extensive experience in highly regulated sectors and environments, including: nuclear, rail, marine, energy/power and petrochemical. The alliance draws together a diverse wealth of experience, learning and expertise for the direct benefit of clients across the UK.

As a work-package integrator and EPC contractor connected to the international market, EFINOR Limited is a privately owned business part of EFINOR Group, which has been established in Bristol in 2017.

We developed as a project-oriented business delivering special and bespoke components and systems for highly regulated industries including nuclear and defence.

EFINOR Limited is engaged on Hinkley Point C where we are currently delivering stainless steel pools, tanks and sumps as well as the Main Control Room fit out whilst maintaining safety at the fore front.

From products (tanks, skids, rack, etc.) to more complex systems (waste handling, glove boxes), we are able to address the full life cycle of projects and are working as Tier 1 or Tier 2 for large customer organisations incl. EDF, EDF Energy, Bouygues, BYLOR, Framatome, ORANO, Naval Group, Babcock, etc.

Providing a complete procurement service, predominantly to the energy sector. ESS offer a service led supply of a variety of piping materials with the ability to check, tag and deliver with full traceability. Utilising decades of personal industry experience combined with progressive technology, allows for a simple purchasing route for mechanical material. Driven by an inherent interest to better understand how our customers operate, in turn to assess how ESS can be better placed to create efficiencies in the supply chain. Ultimately, cutting wastage and saving time which creates a more sustainable industry.

We bring a new perspective on how nuclear energy can enable decarbonisation and are determined to play a major role in climate change mitigation by supporting organisations achieve their economic and social potential in delivering a global net zero transition.

FAUN Trackway Ltd is a specialist design and manufacturer of bespoke fabrications and high integrity material handling equipment.

Over 75 years’ experience in supplying the defence industry in over 40 countries, global leader in military temporary roadways/specialist handling equipment.

FAUN has the ability to Design, Test, Manufacture and Commission multi-discipline projects in house.

Integrated ISO 9001, 14001 and OHSAS 18001 system. With EN1090 Exc 2 structural fabrication.

Modern 4,000m2 production facility, includes a 12m long paint booth and a further 4,000m2 secure storage.

Located centrally on Anglesey, great access to arterial roads and only 16 miles from Wylfa Newydd site.

Flamgard Calidair are one of the world’s leading authorities in the design and manufacture of high quality specialist HVAC (high integrity) dampers and associated equipment. Operating right across the globe within industry sectors as diverse as Oil & Gas, Nuclear, Marine, Power Generation, Tunnel & Metro and Industrial, we have continued to succeed through our focus upon innovation and excellence in everything we do. We are currently working in the Nuclear New Build on HPC and extensively in decommission on various Sellafield projects.

Frazer-Nash, a KBR company, is a leading systems, engineering and technology company. We help organisations deliver innovative engineering and technology solutions to make lives safe, secure, sustainable, and affordable. With over 1000 employees, we work from a network of nine UK and four Australian locations. Our people apply their expertise to develop, enhance and protect our clients’ critical assets, systems and processes.

Horizon Nuclear Power is working to develop a new generation of nuclear power stations at Wylfa on Anglesey and Oldbury in Gloucestershire. Together, both projects would produce 5,800MW for the UK – enough to power around 11 million homes.

Both projects would create up to 850 permanent jobs during operation at each site, with a construction workforce of up to 9000.

In January 2019, Horizon announced the suspension of most of its activities due to the absence of a suitable funding model, however work continues to secure a number of crucial permissions and permits to enable a swift restart should the correct conditions be met. 

Huntingdon Fusion Techniques have been in business for 45 years.  We are inventors, designers and manufacturers of welding purging equipment.  Anybody welding stainless steel, duplex, titanium or exotic alloys will have a requirement for purging and our inflatable systems and weld purge monitors save the welder valuable time and money in completing each weld with brilliant results.

We have extensive experience in nuclear: both new-build and decommissioning.  We have been involved with manufacturing bespoke purging and monitoring systems for HPC which have been used successfully on-site.

In 2019 we won ‘Manufacturer of the Year’ at the ‘Made In Wales’ Awards and Exporter of the Year at the Welsh Chamber of Commerce Awards.

I’m Viv Compton and I set-up Industry Learning Solutions Limited in 2017 to help businesses build resilience and improve productivity through people, systems and technology.

I use my extensive business experience creating tailored company training and apprenticeship solutions and my passion for the manufacturing and engineering sectors, to help busy Department Leads achieve sustained local productivity growth to hit their monthly targets by strategic investment in people development, process improvement and technology that drives efficiency.

The company is based in Wales, UK, supporting a range of sectors focusing primarily on the supply chain industries of Aerospace, Automotive, Defence, Construction, Nuclear and Energy.

InSite provide technical consultancy, project management, design and engineering services. Our team at InSite have a breadth of knowledge from across the energy spectrum with many of our engineers having direct experience in the nuclear sector. This experience, alongside our knowledge of other industries, allows us to offer innovative solutions that are not always considered. Our background enables us to better understand the challenges faced by our clients and efficiently add value to their projects. We provide on-site and remote assistance to clients with concept development, technology selection, multi-disciplinary design, operations input, troubleshooting, optimisation, safety reviews, investment opportunity evaluation, integrity management and training.

Intuety unlocks the true value of your company’s hard-won industry experience. It stores your data. Reads it. Then sends on-the-money insights to your teams, right when they need it.

The Isle of Anglesey County Council is the local authority of the Isle of Anglesey. The Council’s Energy Island Programme (EIP) vision is for Anglesey to be an exemplar in the transition to a prosperous and resilient low carbon economy, providing high quality jobs, education and supply chain opportunities, whilst protecting and enhancing the natural environment and enabling the Welsh Language and culture to thrive in vibrant communities.’

Anglesey has a proud tradition of power generation with the recently decommissioned Wylfa Nuclear Power Station providing quality and stable employment for its residents and communities over its construction and operational life. Anglesey is committed to hosting a new nuclear power station on Anglesey on the condition that it delivers long term transformational benefits – in terms of local jobs, supply chain opportunities, and prosperity for our communities and residents.

James Fisher NDT (JFNDT) specialise in delivering non-destructive testing techniques and services across the globe within industry sectors such as aerospace, nuclear, renewable energy and oil and gas. With extensive knowledge and experience in analysing inspection requirements and tailoring inspection regimes, JFNDT offers the best solution and value for money. JFNDT apply the latest techniques to give you an accurate picture of the condition of safety and business critical components, with the aim to deliver high standard products and services whilst maintaining an important emphasis on safety, quality and environmental impact.

Jenkins & Davies are a mechanical engineering construction company working across the UK and Ireland in the Petrochemical, Power Generation, Marine and Gas industries. We specialise in the fabrication and installation of process pipework, pressure vessels, storage tanks and any associated supporting steelwork requirements. We have facilities that include segregated workshops for any exotic requirements and extensive laydown and storage to accommodate most heavy industry needs. Jenkins & Davies also specialise in heat exchanger works with a special emphasis on pushing-pulling requirements.

Initially JES started out in mechanical, pipework fabrication / installation; over the years we evolved into a multi disciplined company with the expertise to undertake major above and below ground pipeline installations, structural steelwork design / installation, intelligent demolition, under pressure drilling, NDT inspection & design / installation of gas holder tanks, pressure vessels with associated process and control systems As can be seen by the company Safety Pyramid our safety record is excellent, as a Group we strive to improve on a daily basis.

Konecranes brings experience in providing cost effective designs with shorter delivery periods using our state of the art COTS crane components (especially suited to Decommissioning Applications). As well as the expertise of Konecranes Nuclear Equipment & Services (KNES) providing equipment designed specifically for nuclear applications.

The nuclear industry depends on equipment that is designed to operate safely, reliably, and in compliance with stringent quality and regulatory requirements. With more than a half-century of nuclear industry experience adhering to the standards for the design of lifting equipment at nuclear facilities; Konecranes has the experience to meet the most stringent requirements. 

Last Energy is creating a new system for the development and delivery of small modular nuclear power plants in the United Kingdom. Combining proven reactor technology with a first-of-its-kind delivery model and fully modular plant design, Last Energy aims to decarbonise energy production and increase access to clean, affordable power.

LCA Group is a major supplier of electrical, control and instrumentation engineering solutions throughout the UK and overseas. We have been operating for over 30 years developing a formidable range of capabilities and expertise to deliver technically compliant, cost effective and ethically sustainable solutions to our customers.

We pride ourselves on the ability to immerse clients in our design and build processes from our state of the art facility in North Wales, and continual investment in technology remains a priority so that we can continue to maximise working efficiencies with our customers.

Mactech Energy Group is a provider of specialist personnel to the nuclear sector and other regulated industries. Established in 1986, the company is led by an experienced management team from senior backgrounds within the engineering, construction and energy sectors. We believe passionately in establishing long-term collaborative partnerships with our customers based on mutual respect and shared beneficial working relationships.

We are specialist personnel providers to the nuclear sector of: Professional & Technical, Construction & Surveillance Management, Superintendents & Supervision, Inspection Teams, Skilled Tradesmen and Semi-skilled Operatives.

We are a bespoke software development and R&D company based in Reading UK, dedicated to providing innovative products and software platforms in Artificial Intelligence, Cyber Security, Cloud technologies, and High-Tech Computational Engineering in the security, nuclear, corporate and defence sectors.

Mech Tech Professionals is a specialist recruiter within the heavy engineering and heavily regulated industries. Providing permanent, temporary and contract personnel from semi skilled to senior executive level. Proven track record of success recruiting for Hinkley Point C and Sizewell B, supporting SME’s to global organisations.

Mike Waite Nuclear Consulting can leverage years of international nuclear newbuild market experience with Westinghouse, to provide consultancy services to vendors, stakeholders and government organisations.

Mona Lifting was founded in 2005 by Steven Jones, Robin Evans and Anita Davies; who together bought over 60 years of engineering and industry experience to the company.

From our roots in lifting gear we have steadily expanded and now provide a comprehensive range of lifting, crane, engineering and industrial blast cleaning and coating services; and we are proud to be one of North Wales’s leading engineering companies.

Our success is based on sound principles of quality service, quality products, safety and service; and our ability to find practical and affordable solutions to difficult engineering problems. But we also believe passionately in protecting our environment and investing in our personnel and our community.

Moretube Engineering Ltd is a well-established company with over 32 years of experience in the metal fabrication industry. We have gained a solid reputation from our clients for our high standard of work. We also work in partnership with numerous suppliers, clients and contractors to deliver the exact services you are looking for.

Morgan Sindall Infrastructure delivers some of the UKs most complex and critical infrastructure across six core sectors of energy, water, nuclear, highways, rail and aviation for public and private customers. Working on projects and long-term frameworks, we believe in connecting people, places and communities through innovative and responsible infrastructure.

Your UK nuclear industry multi-discipline delivery partner.

Specialists in programme, design, construction and engineering. From start to finish, our projects are built with our belief of being a responsible business and delivering change, whether it is for our people, our environment, communities and UK nuclear.

With over a decade of working in highly regulated and secure environments, our people are our expertise, and we empower them to deliver for our clients safely and securely.

NSAN is a skills for nuclear focussed membership organisation. We are led by nuclear sector employers, from both civil and defence, to provide valuable, cost-effective and practical skills solutions and guidance to organisations large and small.

These are challenging times being faced by the UK nuclear industry, if you are feeling stretched, you are not alone. Attracting, retaining and developing a productive workforce is key for sustaining business growth, but in demanding times you need to make sure that your people and operations are delivering best value for your organisation in line with your broader business objectives. We can help you!

As the UK’s national laboratory for nuclear fission, NNL is harnessing nuclear science to help solve some of the world’s biggest challenges. We channel our work into four strategic areas: Clean Energy, Health and Nuclear Medicine, Environmental Restoration and Security and Non-Proliferation. These four Focus Areas are the cornerstones of our ambition, shaping what we deliver to our customers and for UK society, and how we invest in our future.

At a time when society is waking up to acting on the environmental crisis our planet faces, it is impossible to overestimate the scale of the challenge ahead for the UK in reaching net zero by 2050. Without nuclear, the UK will not meet this target on time. And without NNL’s work, the UK nuclear sector cannot deliver what is required.

We are custodians of a unique set of facilities and capabilities that enable ground-breaking nuclear research and development – including four world-leading laboratories in the North West of England. The most important asset for our future success, however, is our people. We are fortunate to be gifted with some of the most creative and inspired scientific minds in our sector, in the world.

NDT Group is a leading supplier of Non-Destructive Testing & Inspection services, delivered by a team with a combined 75+ years experience in the industry. NDT Group operates throughout the UK and internationally with current projects in Norway, South Africa and Ireland. As a supplier of both conventional and specialist inspections, NDT Group provides clients with a full range of inspection services. A key specialist inspection for NDT Group is inspecting boiler tubes using Phased Array (PA) techniques.  NDT Group operates across a broad set of industries from oil & gas, petrochemical, offshore, nuclear, energy and waste to name just a few. NDT Group, the inspection and testing experts.

The Nuclear Advanced Manufacturing Research Centre helps UK manufacturers win work in nuclear and other innovative energy sectors.

The Nuclear AMRC works with manufacturers to improve capabilities and performance along the supply chain. We can help companies develop new processes and innovative technologies, and raise quality, capability and cost competitiveness.

Our facilities are home to over £35 million worth of production-scale manufacturing equipment, all of which is available to manufacturers of any size for R&D projects.

The Nuclear AMRC is backed by industry leaders and government, and is part of the High Value Manufacturing Catapult.

Part of the VINCI Group, NUVIA is a nuclear specialist with roots in the nuclear industry stretching back over 60 years, providing trusted solutions in programmes and EPC, field services, technical services, consulting and innovative technology for nuclear and other hazardous environments.We deliver ground-breaking solutions, based on NUVIA’s culture of excellence and in-depth knowledge and expertise in all aspects of the nuclear lifecycle to support clients to deliver their nuclear programmes safely, efficiently and with environmental awareness. Today, NUVIA is a key partner for highly demanding industries that place safety and regulatory requirements at the top of their priorities.

As a world-leader in the nuclear fuel cycle, Orano offers products and services with high added-value at every stage of the nuclear lifecycle; from support to New Build, to transport and logistics, dry storage, waste management, and decommissioning.

Orano’s 16,000 employees combine their expertise with cutting-edge technology, a search for innovation and unwavering dedication to safety, to provide their customers with forward-thinking and bespoke solutions.

In the UK, Orano channels its international capability, gained from experience at its own sites in France and other global projects, through an experienced and local UK platform to support the nation’s major sites and clients.



Parker Environmental Services Ltd specialises in the design, fabrication and installation of heating, air conditioning, ventilation and extraction systems, structural steelwork and specialist fabrication for industrial and commercial premises.

Our state of the art premises allow us to manufacture systems to suit bespoke project requirements for a diverse range of industries which include: – Pharmaceutical, Healthcare, Chemical, Defence, Retail, Commercial and Nuclear.

We are members of the Building Engineering Services Ltd (BESA) and are ISO 9001:2015 certified.

PPG Protective and Marine Coatings are widely recognized as a leading name in the industry with our cutting-edge products and technical services protecting assets in some of the world’s most challenging industries and environments. Our ground-breaking technologies protect valuable assets against the destructive effects of corrosion, marine fouling, impact, extreme temperatures, chemicals, and fire. Within the Nuclear sector we provide coatings, approved on specifications for all major reactor designs, that maintain the functionality and operational reliability of nuclear reactors with systems that are resistant to drastic thermal impact and radiation and can also withstand loss of primary coolant accidents and decontamination processes.

PTG Precision Engineers Ltd is a quality assured company manufacturing to exacting standards and hold an extensive range of Quality and Customer Approvals.

PTG Precision Engineers Ltd also hold approval for supply and manufacture of precision machined components for various divisions of Cavendish Nuclear for use in Nuclear Power Generation, Critical Spares, as well as decommissioning.

Quartzelec are an independent engineering services provider with over 100 years’ experience in supporting the full life cycle of rotating electrical machines and associated static plant. From initial design and manufacture through our legacy companies through to the ongoing maintenance, service and engineering upgrades that ensure an extended design life, also heavily involved in the decommissioning of the electrical train. Additionally, TS Metals, part of the Quartzelec group of companies which specialises in laser cutting, bespoke fabrications and welding, we bring our formidable skill set in support of the UK and Wales nuclear decommissioning programmes.

Rhizome Energy Limited is a new start design engineering consultancy based in Somerset and Dartford. We are a group of mechanical and structural engineers experienced in the Marine and Oil & Gas sectors looking to apply our transferrable skills to the Nuclear and Renewable Energy sectors. We are able to carry our detailed designs for piping systems including but not limited to, piping & valve specifications and stress analysis. Similarly and are proficient in the use of Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD) software tools. We can also expedite supply of equipment and provide construction supervision at site.

Formed in 1998 Rhyal Engineering is one of the UK’s leading site-built storage tank and vessel contractors. We design and build new tanks and refurbishment existing tanks. Our personnel have extensive experience gained over many years within the tank industry. This invaluable knowledge has been harnessed to provide our clients with a professional management team, backed up by a highly skilled workforce who can complete projects on time, cost effectively and with the highest standards of safety and quality. We serve the Petrochemical, Aviation, Power, Water and Bulk Storage industries and operate worldwide. Our head office and main fabrication workshops are based in Milford Haven with satellite offices around the UK.

Richards, Moorehead & Laing Ltd. (RML) is an established Welsh consultancy with a 38 year track record working on major development projects in Wales, England and in Europe. We offer the core disciplines of Planning, landscape, ecology and heritage. Our team offers expertise in Consents and permitting, Environmental Impact Assessment, Habits Regulation Assessment, Environmental Coordination, environmental and habitat management and landscape restoration.

For over four decades Robertson Geo has pioneered the development of advanced wireline instrumentation for geophysical and petrophysical applications. Slimhole logging tools are manufactured for use in diverse market sectors including geotechnical, mining, groundwater, hydrocarbon and renewables. The company has continued commitment to provide a market leading service for subsurface geophysics through the acquisition of premium quality logging data. The onsite services division provides experiences capability for ground investigation on major infrastructure projects, including nuclear facilities. The company has a QMS certified to ISO9001 and has exported to over 150 countries.

Sasha Wynn Ltd. is a business growth and community development, stakeholder engagement, communications and networking business based on Anglesey North Wales, covering a wide geographic. Sasha Wynn Ltd. focuses primarily on the nuclear sector but also the broader low carbon energy sector and economic regeneration. Sasha Wynn Ltd, can provide a bi-lingual (Welsh/English) service.

Savills Cardiff Planning advise and guide clients through the various, and often complex, aspects of the planning process. Our energy and infrastructure expertise is considerable across all planning regimes in the UK, including Nationally significant infrastructure projects (NSIPs) and DCO process, and Developments of national significance (DNS) in Wales. Our planning specialists in Cardiff provide commercially informed advice to clients throughout Wales and the UK. This geographical reach and expertise in all areas of land use allows us to combine sector-leading expertise with our detailed local knowledge to provide solutions to the most complex and challenging planning projects.

Simply BD is a business development consultancy that specialises in the nuclear industry. We provide a range of services to help our clients grow and take their business to the next level. This could be through client engagement, lead management, marketing or representation at events, to name a few. Whether they are looking for long-term support or need help with a one-off project, we will work together to develop the best solution to meet their needs.

SHS offers a specialist service in thermal engineering in the heat treatment industry for both electrical and gas. Our company specialises in on-site in-situ work as well as furnace heat treatment. 

SHS offer services in preheating, post weld heat treatment, stress relieving, refractory dry out, curing, annealing, normalising, expansion, shrinking and hydrogen bake out, high voltage, low voltage, electrical and gas in the following sectors : Power Station, Oil Refineries, Petro Chemical Plants, Power Plants, Nuclear Plants, Gas, LNG Terminals, On Shore Off Shore, Power Generation, Mechanical Engineering Workshops and Companies, Ministry Of Defence.

Also a heat treatment furnace division has been established at our head office premises in Port Talbot where we have three different sized furnaces.

Do you want to grow your business by working with a trusted global brand, who deliver unparalleled access to UK and overseas markets from here in Wales?

75,000 UK businesses trust us to connect them across at the UK, and to 60 British chambers overseas.  Our Welsh Chamber businesses employ 50,000 people, turnover £5billion pa, and we support Welsh exports to over 100 countries.

With powerful influence, we are listened to by both UK and Welsh Governments, the Bank of England and London Stock Exchange. Our pedigree includes industry respected directors, Carwyn Jones MS  as Honorary Patron,  recognised Welsh brands as partners, and strong media coverage. Only business understands business. Join your Chamber from £21 pcm . As one Welsh manufacturing MD said, “every time we work with the Chamber good things happen”.

With 75 years experience, Squibb Group is a recognised leader in the field of controlled demolition. As a principal contractor we bring unrivalled expertise to all facets of the modern demolition process. Delivering tailor-made, application-specific solutions, including 2D-3D modelling and temporary works design, that include top-down deconstruction, remote controlled demolition, piecemeal demolition, and explosive demolition methods.

Providing consultancy & NED services to organisations within or considering entering the nuclear sector.

Steel Dynamics are primarily a stainless-steel & carbon sheet/plate stockist holding between 700 & 1000 tonnes of material at any one time from <1mm to 100mm+, we also provide total supply-chain solutions in high grade nickels, & titanium. We process our stock by laser, water jet, plasma, press brake & CNC machining, we help our customers to achieve their cost reduction goals by increasing yield, reducing scrap, manufacturing processes, cycle times & duplication, focusing on one-touch solutions. We manage large projects from inception to completion or supply simple profiles to point of use.

Teddington, design, manufacture and supply metallic expansion joints/bellows, rubber bellows and Hoses.

Teddington has been designing and manufacturing bellows since 1927 lodging a patent for one of the original bellows designs in 1928. Teddington has extensive experience in many market sectors, supplying Nuclear globally since 1959.

Teddington is considered as a world leader supplying expansion joints to the nuclear sector.

Key points:

  • Sizes – 10mm to 8M.
  • Pressure – 1 Bar to 300 Bar.
  • Expansion Joint Manufacturers Association (EJMA) members.
  • F4N approved.
  • Rolls-Royce nuclear approved.
  • Supplying nuclear industry since 1959.

Patented bellows for industrial applications in 1928.

We at TemporaryWorx provide end-to-end Temporary Works management services throughout UK & Europe by using practical delivery experience gained on some of the largest Construction & Infrastructure Projects in the UK. The foundation, upon which we have built TemporaryWorx, has been focused on client delivery. We’re committed to improving safety and improving efficiency through innovation & collaboration with our clients. We ensure that irrespective of size and value, we uphold the same morality, ethics, and values for each and every project. Our dedicated team of TemporaryWorx professionals build solid and long-lasting relationship with our clients and suppliers, which ensures our continued success, and we boast a client base of which we can be proud. Our continued investment into TemporaryWorx is highlighted by the continued growth of the company, which is structured to ensure that we keep pace with the environment in which the speed of new technology develops of which our clients come to expect.

Since its formation in 2005, the aim of Tenet has been to provide expert design engineering skills to assist our Clients in the nuclear decommissioning effort. With a dedicated team of experienced designers and engineers, Tenet has proven capability to provide innovative solutions to tackle the most complex of engineering challenges.

Turnbull Infrastructure and Utilities Ltd


From design & build to facility management & maintenance, Turnball provide a complete solution for large scale engineering projects. Established to support the installation and operation of utilities for Hinkley Point C, now, Turnball are applying a practiced approach to multiple infrastructure projects – helping clients operate efficiently and adding long-term value to local and wider economies. This is the blueprint for the successful construction, operation and maintenance of projects.

TÜV UK Ltd is a UKAS accredited Notified Inspection and Certification body. We also provide elite specialist consultancy services from expert Associates, some of whom have held the most senior positions in the UK Regulatory system, Government and the Nuclear industry.  We build strong collaborative relationships, spanning a wide range of niche expertise, and develop fit-for-purpose solutions across the energy sector with focus on innovation and technological development.  We have reach back to significant energy specialist resource capacity from our TÜV NORD Group partners in Germany

TWI Ltd Wales specialises in the development and application of state-of-the-art non-destructive testing (NDT) methods. Through applied research and development in response to requests for assistance from Member companies, we provide real-world solutions to inspection challenges across a broad range of industries. These technologies are particularly important for industry, where there is potential growth in sectors such as aerospace, petrochemical, road and rail transport, energy, and healthcare.  Robust, cutting-edge inspection technologies are vital to underpin the structural integrity required to ensure that industry can provide safe, reliable and cost-effective products.

Ubique Risk Management are specialists in security risk management and professional training. Our significant experience has enabled us to provide business focused solutions for a wide range of clients in the nuclear industry both in the UK, and abroad.

Our Suitably Qualified and Experienced Personnel (SQEP) work on Category I to IV sites on tasks associated to the nuclear fuel cycle.  We are committed to assisting our clients provide safe and secure environments identifying solutions that meet business and regulatory expectations for the protection of Nuclear Material, Other Radioactive Material, and Sensitive Nuclear Information against the applicable threats.

Urenco Nuclear Stewardship has a leading role in providing responsible stewardship of nuclear materials through waste management, long term storage and decommissioning services. We are a wholly-owned subsidiary of Urenco, having joined the established Urenco group in 2012, which has been a crucial part of the global nuclear industry for over 50 years.

Our workforce has demonstrable experience of providing end-of-lifecycle management solutions for the nuclear industry, developed through many years of decommissioning the UK’s nuclear legacies on the Capenhurst Nuclear Licensed Site, and through the ongoing operational waste management for our sister companies, Urenco UK and Urenco ChemPlants.

From Wales, we supply our customers in the UK with a specialist external laundry and lease service, sales of a variety of PPE, respirator service and accessories. We also offer decontamination service for several applications, especially metal objects such as tools, scaffolding and pipe systems.

There has been an impressive growth in revenue over the past few years. Growing from a handful of customers at our inception in 1998, we now provide service to 42 customers of different sizes and with a variety of needs.

This development has been made possible as a result of both the demand to reduce radioactive waste, and the need to save costs while maintaining expectations for the highest possible quality.

Vessco Engineering Limited designs and manufactures pressure vessels, heat exchangers, skid packages, columns, tanks, silos and specialist fabrications for the nuclear, oil & gas, water and chemical industries. Vessco is a Tier 2 supplier of pressure vessels and high integrity fabrications to Hinkley Point C and other nuclear sites within UK.

Current projects for HPC include two of the largest pressure vessels on the site – feedwater tanks for GE Power Systems to be sited in the turbine halls. Other contracts include super duplex fabrications for the Balfour Beatty marine tunnel contract and 8 off duplex filter vessels for water treatment leader Ovivo UK.

Viridian Consultants is an award winning company specialising in the development of innovative solutions for nuclear decommissioning and homeland security. Our robust, practical, easy to use tools for plant characterisation are developed at our North Wales site. The ViridiScope laser sampler has been trialled across the UK and is now being deployed at Trawsfynydd making the decommissioning process safer, cleaner, faster and more cost effective. ViridiScreen is our new robust remotely deployable alpha detector. ViridiScan can deliver rapid, in-situ isotopic data for a wide range of sample types.

Our primary goal is to protect people and the environment. We seek the widest possible approval of how we manage our environmental responsibilities – and take these extremely seriously. To continually improve our environmental performance, we will: Eliminate accidents and incidents Minimise waste and the use of natural resources Ensure that all wastes are managed safely and with care for the environment.

The William Hare Group is a global independent steel construction specialist. The family run business is headquartered in the United Kingdom and has origins which date back to the 1880s. The company operates across the entire globe and has executed projects in over 50 countries.

With an unrivalled knowledge of steel engineering, fabrication and erection, William Hare is proud to have one of the best trained and safest workforces in the industry. The company employs over 2,000 highly skilled staff which gives the business one of the largest and most knowledgeable design and engineering resources in the industry. The technical resources in the UK and the UAE are supplemented by large, dedicated engineering teams based in Chennai, South India and Manila, Philippines.

The whole infrastructure exists for the purpose of providing exceptional levels of service to each and every William Hare client. The company’s aim is always to build a solid, collaborative, mutually beneficial working relations for the long-term.

Tel: +44(0)161 609 0000

Web: www.hare.com/

Wincanton is a leading supply chain partner for UK business working with multiple clients involved with major projects across the UK. Wincanton lead the design, implementation, and management of secure, efficient supply chains, often in highly competitive and compliance driven sectors. Wincanton have proven experience working on major compliance led projects including Hinkley Point C in Somerset and Ship Building in Scotland. On these projects dedicated services are provided from multiple locations to include warehousing, asset tracking, asset management, and transport services to deliver and control multiple items in-line with project plans.

Wynns are consulting engineers specialising in the transportation of abnormal indivisible loads. We have an experienced team that includes transport engineers, environmental specialists and project managers. We have a broad range of clients across the electricity generation and supply, petrochemical and heavy manufacturing sectors.

Wynns currently provide the secretariat for the Movement Along Welsh Routes (MAWR) Group. MAWR has spent considerable time and resources ensuring that access for heavy loads is maintained to member companies sites. Typically, heavy load requirements are necessary from the ports of Holyhead, Port Penrhyn and Porthmadog Trawsfynydd and Ffestiniog.

Zip-Clip are designers and manufacturers of high-specification wire suspension and bracing solutions used in an ever-increasing range of applications. The systems are recognized globally for their fully accountable performance, functionality, and flexibility.

Developed by highly experienced in-house R&D teams, in close consultation with specifiers, engineers, and contractors, Zip-Clip systems offer suspension and bracing solutions for all electrical, HVAC, mechanical, acoustic and radiant panel, and signage needs and this list is ever-increasing!

Zulu Joint Integrity & Training Ltd specialises in the design, implementation and execution of strategic critical flange inspection, joint integrity/leak prevention management and joint integrity training in line with global industry guidelines and legislation (BS EN 1591-4:2013, ECITB MJI10/MJI11, ASME PCC-1:2013, Energy Institute Guidelines). Our group capabilities also offer gasket and sealing product manufacture, technical support and leak detection services – collectively a ‘full circle’ leak prevention service to the nuclear, chemical, petrochemical and oil/gas industries.

Our primary focus is to ensure that we support our clients to achieve a safe leak free process environment.

Scroll to Top